Childhood Inventions

Three years ago my dad and I thought it would be cool to make a robot to cut truss lumber. We started the project but put it on hold to...

During the spring semester of 2019, I took an honors calculus-based physics class. Part of the curriculum was to do my own physics...

My father, brother, and I built the Automated Laminated Post Machine to fabricate laminated posts for our family's business, APM Build...

I was asked to create a Rube Goldberg machine for physics class. A Rube Goldberg machine is an overly complicated device for performing a...

Billy the Bear took 2nd place at the 2017 national TSA animatronics competition. Billy the Bear is an animatronic bear like no other. He...

As a freshman in high school and at the age of fifteen, I decided I wanted to build a 3D Printer. After six months, I had accomplished...

My Car took first place at regionals in 11th grade. Located in the right lane, it traveled 60 feet in less than a second. The body is...

The Automated Post Machine uses a combination of pneumatics, electronics, and mechanical parts. When all synchronized together by a micro...

I installed RGB LEDs on my 1998 dodge 2500 from scratch (not an off the shelf kit). I cut/soldered all of the LED strips and ran the...

When I took Tech Ed class in 10th grade, I made a Lego robot that could navigate through a maze by following a black line. The robot...

This here is an air powered oscillating engine I made back in 9th grade. Inside the wood body is a brass cylinder and channels. By having...

With an Arduino Uno and five servo motors, I was able to program and control this robotic arm to continually move the ball around.

This is referred to as a candy rocket because it contains sugar. I made several of these rockets from scratch using Potassium Nitrate...